Signage Panels Aluminium Ceiling Tiles Vinyl Laminated Gypboard Tiles Fire Rated Building Boards

Shaped Solid Aluminium Panel Aluminium Honeycomb Panel Fireproof Aluminium Composite Panel Architectural Mouldings



ALUBOND U.S.A - A DESIGNER SOLUTION FOR MODERN BUILDINGS
Alubond U.S.A is the brand name for the new technology Aluminum Composite Building Panel from American Building Technologies, Denver U.S.A.The panel is a composite consisting of two layers of aluminum skin sandwiching a thermoplastic core in a continuous co-extrusion process. This new generation technology of mechanical and chemical bonding gives Alubond Panels an exceptional bond integrity.

The outer aluminum skin for exterior grade Alubond U.S.A Panels is coated with PVDF Kynar 500 fluorocarbon coatings. The lower aluminum skin is chromate treated.

Alubond product advantages

  • Lightweight, extreme rigidity and flatness resulting in an economical option for high quality building facades and interior claddings.
  • Weather resistance combined with high acoustics, Thermal and Fire rated values.
  • Choice of Solid, Metallic, Granite, Veneer , Arctic Ice and Chameleon colors makes ALUBOND an Architect’s dream for a choice of interior and exterior facade’s treatment.
  • Kynar 500 PVDF Coatings from P.P.G U.S.A and Alcan Aluminum U.S.A used on all ALUBOND panels provides for 10 to 15 years warranty!
  • Easy machinability gives the flexibility of shapes making it a versatile panel to achieve complex designer solutions.


Comparison Chart between ALUBOND, Solid Aluminum and steel

Alubond Aluminum Composite Panels have distinct advantages over other popular Cladding materials like Solid Aluminum and Steel with superior Strength to weight ratio as well as flatness, thermal and acoustic properties to name a few.

Item
Product Range
Coating / Finish
Aluminum
Weight 4 mm: 5.48 kg/m2 3 mm: 8.0 kg/m2 1.5 mm: 11.47kg/m2
Flatness Very Flat Uneven Uneven
Heat Insulation Best Poor Poor
Sound Insulation 25db 15db 5db
Echo Response Low Medium High
Paint Consistency Best Inconsistent Inconsistent
Paint Microns Even Uneven Uneven
Weather Proof Good Good Good
Fire Proof Good Good Good
Fabrication Easy Difficult Very Tough
Delivery Quick Slow Slow
Total Cost Economical Medium Cost Expensive
Maintenance Easy Easy Easy
Installation Quick Slow Very Slow

  Alubond Panel Dimensions:
Standard Width 1220 mm
Available Widths 1000 mm, 1250 mm, 1500 mm, 1550 mm
Standard Length 2440 mm
Available Lenghts Any length upto 4800 mm
Available Thickness 1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm

Alubond Product Range

Product Range
Alubond ACP Available Thickness
Coating / Finish
Aluminum
  1mm 2mm 3mm 4mm 5mm 6mm    
Alubond - Exterior No No Yes Yes Yes Yes Kynar 500 PVDF Alcan - U.S.A
Alubond - Interior Yes Yes Yes Yes Yes Yes Polyester Alcan - U.S.A
Alubond - Granite - Ext No No Yes Yes Yes Yes Kynar PVDF Films Alcan - U.S.A
Alubond - Granite - Int No Yes Yes Yes Yes Yes IT-Polyester Alcan - U.S.A
Alubond - Veneers - Ext No No Yes Yes Yes Yes Kynar PVDF Films Alcan - U.S.A
Alubond - Veneers - Int No Yes Yes Yes Yes Yes IT-Polyester Alcan - U.S.A
Alubond - Arctic Ice - Ext No No Yes Yes Yes Yes Kynar PVDF Films Alcan - U.S.A
Alubond - Arctic Ice - Int No Yes Yes Yes Yes Yes IT-Polyester Alcan - U.S.A
Alubond - Chameleon - Ext No No Yes Yes Yes Yes Kynar PVDF Films Alcan - U.S.A
Alubond - Chameleon - Int No Yes Yes Yes Yes Yes IT-Polyester Alcan - U.S.A

  Wind Load v/s Panel Dimension

 
 

The above graphs show 4 mm and 6 mm thick ALUBOND panel's maximum permissible lengths based on the appointed wind load and panel width. The values given above are fixed only for panels that are supported on four sides.

ALUBONDU.S.A Test Report Data
130 Derry Court
York, PA 17402-9405
Tel : 717-764-7700 Fax : 717-764-4129
Website : www.archtest.com
Properties Result Test Testing Laboratory
Thermal Conductance 5.79 Btu/hr.ft2.0F (32.9 W/m2.0K) ASTM C 518 Architectural Testing, U.S.A
Tensile Strength
Yield Strength
Elongation		 5,408 psi (37.3 MPa)
3,737 psi (25.8 Mpa)
6.1% 		ASTM D 638 Architectural Testing, U.S.A
Deflection Temperature Under Load 211° C (411.8°F) ASTM D 648 Architectural Testing, U.S.A
Coefficient of Linear Thermal Expansion 2.02 x 10-5 mm/mm.°C
(1.12 x 10 - 5 in. /in. °F)		 ASTM D 696 Architectural Testing, U.S.A
Impact Resistance 4092 psi (28.2 MPa) ASTM D 732 Architectural Testing, U.S.A
Toxicity Within Acceptable Limits TCLP Architectural Testing, U.S.A
Color Change at - 20°C No Visible Change ATI, York U.S.A Architectural Testing, U.S.A
Color Change at 80°C No Visible Change ATI, York U.S.A Architectural Testing, U.S.A
Delaminating at  - 20°C No Delamination ATI, York U.S.A Architectural Testing, U.S.A
Delaminating at    80°C No Delamination ATI, York U.S.A Architectural Testing, U.S.A
Warrington Fire Research Centre Ltd,
Holmesfield Road, Warrington, UK WA1 2DS
Tel : int + (0) 1925 655116
Fax : int + (0) 1925 646672
Website : www.wfrc.co.uk
Method for Classification of the surface spread of Flame of Products Classified As Class 1 BS 476 Part 7 1997 Warrington Fire Research, U.K
Method of Test for Fire Propagation for Products Fire propagation index, 1  = 2.6 BS 476 Part 6
1989		 Warrington Fire Research, U.K
 
Item
Unit
Thickness
Standard
 
3mm
4mm
6mm
  
Density
g/cm3
1.52
1.37
1.22
ASTM D792
Weight
Kg/cm2
4.55
5.48
7.34
 






Copyright © 2004   Email: info@alubondiberica.com